Care And Maintenance Tips For Your Grease Trap
Fats, oils, and greases are the main causes of clogs in the drainage and sewer system. Poor disposal of these substances can cause serious and frequent clogs in your sink drains. Leftover greases, oils, and fats coagulate in the drainage
and sewer system and trap other solid waste substances to clog the whole system. But many homeowners are already aware of this risk and are hence very careful when handling food remnants with lots of toils, greases, and fats. They try to dispose of these substances in the garbage bin instead of dumping them in the kitchen sink. And considering that the average home produces just a little amount of these substances, they do not pose a very serious clogging problem. Real greasy problems are faced by large households with big busy kitchens and hotels and restaurants that use lots of these substances when cooking. It’s very hard to control waste disposal in a commercial kitchen. You will still find the workers dumping lots of fats, oils, and greases in the kitchen sinks when washing the dishes. That is why you need to install a grease trap in your commercial kitchen or if you have a very busy residential kitchen. You should also observe the following care and maintenance tips to ensure the functionality and enhance the durability of your grease trap.
Proper Installation
You should start by buying a high quality grease trap. When it comes to plumbing fixtures and appliances, you always have to go for quality. This will ensure that the grease trap performs as expected and that it does not break down all the time. A high quality grease trap is reliable, convenient, and easy to maintain. You should also ensure that your grease trap is installed properly by a qualified and experienced plumber. This will ensure that the device is installed in the right place away from various physical hazards but at an optimal position so that it can function properly.
Regular And Proper Pumping And Cleaning
A grease trap requires regular pumping and cleaning. The oils, fats, and greases that the device trapped should be pumped out at least once a month. Grease trap pumping and cleaning is a popular drain service in Fredericksburg. Plumbers use a special pump to vacuum the accumulated or trapped greases and oils from the grease trap to a tank in their trucks. They proceed to dispose of the waste in the right areas. You should consider hiring a professional plumber to pump and clean your grease trap on a monthly basis to ensure that it continues working properly without clogging. You can also decide to clean your grease trap manually. You can just open the device and scoop out the accumulated fats and greases. This is a messy process with unbelievably bad odors but some people do it. There are easier and more practical ways of cleaning a grease trap with bacterial treatment plan. These methods are highly recommended because they reduced the accumulated oils and greases to water and carbon dioxide keeping the grease trap odorless.
Regular Inspection And Maintenance
Like all other plumbing fixtures and appliances, your grease trap should be inspected regularly and thoroughly after every cleanup. Yu should also make a point of inspecting the device from time to time to ensure that its operating properly.
You might also like


