4 Causes of Sewer Pipe Problems
A sewer pipe is a drainage pipe used to carry waste matter and dirty water from homes, buildings or factories to treatment or disposal sites. They play an important role and are part of a sewage system. Due to the positioning of the sewer pipes, they are prone to different types of problems, some caused by nature and some by our daily activities. If you use a sink, toilet or tub only to find water backing up into your home, you are probably experiencing one of these common sewer problems. Contacting and hiring a plumber in Alexandria will help diagnose, fix, and eliminate the problem, and get your plumbing back on track.
Rust
A sewer pipe comes into contact with water and other materials, and this causes a reaction with the pipe, and it starts to rust. Rust is commonly a reaction that occurs when iron comes into contact with oxygen and moisture or water for an extended period of time. The main catalyst for the rusting process is water. When this happens, the corrosion is flaky and friable, and it provides no protection to the underlying iron which can lead to cracks and leaks It is recommended to have a plumber do a sewer system inspection at least once a year to prevent rust from developing.
Tree Roots
Most sewer pipes are located below ground in trenches. It is the same place where roots from trees and plants grow as they look for water and organic nutrients. As the tree grows, its roots spread farther in order to support and sustain it. Even if there are no trees directly above the sewer pipe, tree roots spread over a long distance, and they can invade sewer pipes many feet away. They grow around the pipe and crush it or push and break the pipe as they spread and grow bigger in size. The best way to avoid this problem is not to plant trees near the pipes in the first place but in order to determine if tree roots are the cause of the sewer problem, professional plumbers offer camera inspection services.
Blockage
The leading cause of blockage is the improper use of the drainage system. Some things should not be flushed down the toilet or sinks. Some materials get in the pipes and start to clog slowly or immediately. The best way to avoid this is to put trash in a garbage can or bag. Also, grease liquefies when heated and solidifies when cooled off and this can result in a build up in a sewer pipe and make the water drain more slowly or create a severe blockage.
Breakage
Sometimes when digging there is a chance of hitting a sewer pipe,and depending on the material used to make the pipe, the sewer pipe might break. The best way to avoid this is first to locate a sewer pipe before you start digging, if at all possible.
You might also like


